Shenzhen Puzhesi Technology Co., Ltd.  

Product Name: Addressable Fire Alarm System Smoke Alarm System Model NO.: FW6000 Wiring Mode: Bus System Receive Frequency: Wire Networking Mode: 485/232 Alarm Volume (within 1m): ?80dB Usage: Fire, Smoke Function: Addressable Type: Fire Alarm Host Weight: 8kg Standby Battery: 2*12V/12ah Tempreature: Zero Degree to 40 Degree AC Power: 220V Line: 2 Wire Trademark: ALARM Transport Package: Carton Specification: 330*120*400MM Origin: China Product Description FW6000 Intelligent Fire Alarm Control Panel (FACP) is the new-generation fire alarm control unit designed by our company for applications in small and medium projects. It is wall-mounted type and has the advantages of powerful function, high reliability and flexible configuration. The panel is equipped with a LCD monitor to display all the information on fire alarms, faults and various operations, which can be printed out by the built-in printer. FW6000 is a one-loop control panel with maximum 240 points, which can work together with all FW 3 series field devices. Note: COM port needs grounding1,(Monitoring Start Output)HJ: Active NO terminal to Fire alarm routing device (use jumper to switch between passive and active), which will close to connect +24V output after started (each points with a max output current of 100mA)2,(Monitoring Start Output)SG: Active NO terminal to Sounder Strobe (Both active and passive modes, use jumper to switch between passive and active), which will close to connect +24V output after started (with max output current of 100mA for each direct-start point) 3,BUS: Non-polarity two-wire bus terminal4,linkage power supply output: 24VDC(Max output current 1A) 5,Main board power supply input: 220VAC 6,Grounding Terminal: Grounding2.4 Technical Specifications2.4.1 Power Supply: AC power: Nominal operation voltage 220VAC (187VAC ~ 242VAC)Standby Battery: 2 x 12V/12AH 2.4.2 Operating Environment:Temperature: 0ºC~+40ºCRelative Humidity: ≤95%, non-condensing2.4.3 Capacity: One loop with maximum 240 devices2.4.4 Display: LCD 128×64 lattice graphic2.4.5 Dimension: (Length ×Width ×Height):330.0mm×130.0mm×400.0mm 2.4.6 Wiring requirement1,Recommend to use RVS2×1.0MM2 or RVS2×1.5MMtwisted wire for CAN communication wire and bus wire, while use RVSP2×1.0MM2 at the high interference environment.2,Not allowed to lay CAN communication wire and telephone line together with bus wire inside the same multi-core cable.